Detailed parameters of automatic magnet insertion machine for shaped motor rotor
| 参数项 | 规格 |
|---|---|
| 工艺流程 | 转子自动点 AB 胶 → 插磁钢 → 压合 |
| Product Applications | 异型转子 · AB 胶水 · 磁钢片 |
| 行业应用 | 新能源电机 · 汽车电机 · 马达 |
| 工作效率 | 800–1800 PCS/H |
| 设备节拍 | 2–4.5 s/PCS(由 800–1800 PCS/H 换算)※ |
| 操作人员 | 1 人 |
| 换型时间 | ≤30 min※ |
| 控制方式 | PLC + HMI(可接 MES 系统)✔ 通用配置 |
| 电源 | 三相 AC 380V / 50Hz✔ 通用配置 |
| 定制流程 | 需求沟通 → 方案设计 → 设备交付 → 现场调试 |
Detailed parameters of special-shaped rotor magnet inserting machine
| Parameter | Specification |
|---|---|
| Process | Auto AB dispensing → magnet insertion → pressing |
| Applications | Special-shaped rotors · AB glue · magnet pieces |
| Industries | NEV motors · automotive motors · general motors |
| Output | 800–1800 PCS/H |
| Cycle time | 2–4.5 s/PCS (converted from 800–1800 PCS/H)※ |
| Operators | 1 |
| Changeover time | ≤30 min※ |
| Control | PLC + HMI (MES-ready)✔ Standard |
| Power supply | 3-Phase AC 380V / 50Hz✔ Standard |
| Customization flow | Requirement → Design → Delivery → On-site commissioning |

ProductOverview:
实现对各类异常rotor多形状的磁钢片插入装 配自动化,完成对转子glue dispensing,转子自动定位,自 动磁片插入,自动检测,自动下料等工述,具有 操作简单,通力性强,广泛应用于流水线的在批 量作业。

Motor automation equipment recommendation
Recommendation
Unfortunately, no information was found for you
Frequently Asked Questions
Common questions on selection, process and delivery. To learn more, contact us directly.
Q1. How is every magnet position kept accurate on special-shaped rotors?
The rotor is indexed first, AB adhesive is dispensed, then magnets are inserted and pressed. The fixture defines the datum and the special profile is machined to your drawing. Different magnet shapes are handled in segments by one program, so a new shape does not call for a new machine.
More motor equipment FAQsQ2. What output level should we expect?
Rated output is 800-1800 PCS/H, equivalent to 2-4.5 s/PCS depending on magnet count and adhesive curing. One operator runs it, and the PLC + HMI control is MES-ready for cycle and yield records.
More motor equipment FAQsQ3. Must we use two-component AB adhesive?
The process is designed around AB adhesive, with mixing ratio and dispensing volume calibrated during trial production. If your current process uses a single-component or another adhesive, the dispensing valve and curing method need evaluation, which is settled at proposal stage.
More motor equipment FAQsQ4. Which industries and rotor types suit this machine?
Mainly special-shaped rotors for NEV drive motors, automotive motors and general-purpose motors, where magnet shape is irregular or positions are asymmetric. For a standard round rotor with a regular pole layout, a conventional magnet-insertion machine is enough and this model would be over-specified.
More motor equipment FAQsQ5. Do different magnet shapes need separate machines?
No. Different shapes are handled in segments within one program, inserted position by position; changing product means changing the fixture and recalling the matching program. A separate fixture set is only needed when the shapes differ too much for one set to serve.
More motor equipment FAQsOnline Message
Online Message