“先装配、后充磁”怎么排?久巨新能源汽车驱动电机装配线的工艺顺序
298久巨在驱动电机产线上默认把整体充磁排在定转子合装之后,而不是先充磁再装配。磁损与磁极错位都发生在装配段,充磁放到线尾才能在成品形态下一次成形。
View Full Version很多电机生产企业在选择和使用电机magnetizer时,都会遇到各类疑问。首先,电机充磁机的核心工作原理是什么?其实它是通过瞬间释放高压大电流,在充磁线圈中产生强磁场,使电机磁钢(钕铁硼、铁氧体等)获得永久磁性的设备。其核心逻辑是利用电磁感应原理,通过电容储能放电技术,让磁钢内部磁畴定向排列并固定,确保电机运行时的磁性能稳定。

在选型环节,企业最关心的是如何选到适配的设备。选型需聚焦 3 大核心参数:一是Magnetization磁场强度,需匹配磁钢材质,比如钕铁硼磁钢就需要更高的磁场;二是充磁头适配性,必须与电机定子 / rotor尺寸精准匹配;三是放电频率,这直接影响生产效率,自动化生产线需优先选择高频机型。此外,设备稳定性、操作便捷性及厂家售后支持也不能忽视,这些都是保障后续生产顺利的关键。
In the process of use, the motor magnetizer inevitably fails, commonly have poor magnetizing effect, equipment can not start, uneven magnetic field and other problems. When the magnetization effect is poor, you need to check whether the magnet placement position is offset, whether the magnetic field strength is up to standard; equipment can not start to check the power supply connection and capacitor storage state; uneven magnetic field may be the magnetizing coil position offset or magnet material inconsistency caused by the need to calibrate and screen the magnets in a timely manner. Daily maintenance is also very important, you need to regularly clean the equipment, test the stability of the circuit, to avoid overloaded operation, in order to extend the service life of the equipment.

There are still companies will ask, motor magnetizer is suitable for what types of motor production? In fact, it is widely used in the production of DC motors, stepper motors, brushless motors, servo motors and other types of permanent magnet motors, covering a variety of fields such as new energy vehicles, home appliances, industrial automation, medical equipment, etc. Professional manufacturers can provide customized magnetization solutions for different powers and sizes of motor magnets.

久巨在驱动电机产线上默认把整体充磁排在定转子合装之后,而不是先充磁再装配。磁损与磁极错位都发生在装配段,充磁放到线尾才能在成品形态下一次成形。
View Full VersionJiuju Automation manufactures high-precision motor magnetization equipment and magnetization stations that support multi-waveform, programmable magnetization for ferrite, neodymium-iron-boron, and bonded magnets, and provide quality traceability capabilities.
View Full VersionJiuju Automation manufactures high-precision motor magnetization equipment and magnetization stations that support multi-waveform, programmable magnetization for ferrite, neodymium-iron-boron, and bonded magnets, and provide quality traceability capabilities.
View Full VersionJiuju Automation provides automated assembly solutions for drive motors in new energy vehicles, integrating key processes such as winding, magnet insertion, magnetization, and testing to ensure high efficiency, high consistency, and full traceability throughout the entire process.
View Full Version