Why the Encoder Sits in the Last Station of a Servo Motor Assembly Line: Jiuju Explains the Process Layout
303编码器是伺服电机产线上唯一以转子实际位置为零点的工序。它之前的绕线、插磁钢、合装、动平衡每一步都在改变状态,先装就要反复重标零点。
View Full Version随着工业机器人、高端数控机床、半导体装备等领域的快速发展,下游市场对伺服电机的精度、响应速度等性能指标提出了越来越严苛的要求。作为伺服电机的核心部件,rotor的加工精度直接决定了电机的最终性能,而传统的加工工艺,已难以满足当前高端领域的微米级精度要求。在此背景下,转子加工的Automation技术突破,正在成为高端伺服电机国产化的关键突破口。

According to industry reports, the current high-end industrial robot servo motors, the rotor balancing accuracy needs to reach G0.1 level, corresponding to the amount of residual unevenness needs to be controlled within 0.1g・mm/kg, which requires machining centers to achieve positioning accuracy of ± 2μm, and in continuous processing of more than a thousand pieces can still maintain the stability of accuracy. In the past, the majority of domestic enterprises still rely on semi-automated equipment and manual calibration mode of rotor processing, not only processing efficiency is low, the consistency of the accuracy of the batch products is also difficult to guarantee, and has become a constraint on the breakthrough of domestic high-end servo motors core bottlenecks.

而自动化加工技术的成熟,正在彻底改变这一局面。当前行业内的先进方案,通过五轴联动加工中心配合激光微雕工艺,实现了转子铁芯的高精度加工,同时引入了在线视觉检测与闭环补偿系统,可实时修正加工过程中的误差,将转子的加工精度稳定控制在微米级。同时,针对转子磁钢装配这一关键工序,自动化设备通过力控与视觉的融合,将磁钢的装配精度控制在 ±0.01mm,轴心压装的同心度控制在 0.02mm 以下,彻底消除了人工操作的波动。
This technological breakthrough has directly promoted the performance upgrade of domestic high-end servo motors. Data show that the use of automated rotor processing process servo motor, its repeat positioning accuracy can reach ± 0.005mm, the command response speed to 0.05ms level, torque fluctuation control within 1%, has reached the level of international first-tier brands. At the same time, the automated production also controls the defective rate of the product below 0.1%, and the production efficiency has been increased by 50%, which significantly reduces the manufacturing cost of high-end servo motors.
With the acceleration of the domestic substitution process, the market demand for high-end servo motors is still rapidly released. Industry experts said that the rotor processing automation technology breakthroughs, not only make up for the domestic servo motor manufacturing shortcomings, but also for the follow-up axial flux motors and other new servo products to lay the foundation for the mass production of the future will further promote the autonomy of the core components of domestic high-end equipment.
编码器是伺服电机产线上唯一以转子实际位置为零点的工序。它之前的绕线、插磁钢、合装、动平衡每一步都在改变状态,先装就要反复重标零点。
View Full VersionA multi-pole architecture brings a high-frequency fundamental; at 10,000 rpm the fundamental frequency can reach several kHz. Traditional IGBTs suffer soaring switching losses and severe heating — it is the MHz-class switching capability of SiC MOSFETs that truly matches high-frequency multi-pole axial flux motors.
View Full VersionA multi-pole architecture brings a high-frequency fundamental; at 10,000 rpm the fundamental frequency can reach several kHz. Traditional IGBTs suffer soaring switching losses and severe heating — it is the MHz-class switching capability of SiC MOSFETs that truly matches high-frequency multi-pole axial flux motors.
View Full Version新能源汽车驱动电机的定转子合装是整线装配的核心工序,直接决定电机气隙均匀度、运行噪音与可靠性。不少车企与电机厂在选型合装设备时,只关注设备价格,忽略了供应商的工艺实力,导致量产后良率不达预期。 首先要看气隙控制的技术方案与精度指标。驱动电机气隙公差...
View Full Version