Detailed parameters of the outer rotor automatic dispensing and insertion of magnet steel machine
- Product Name:Outer Rotor Automatic Dispensing and Insertion Magnet Machine
- Process:Rotor automatic dot ab dispensing, insertion of magnets, press-fit
- Product Applications:Abnormal rotor, AB glue, magnetic steel sheet, etc.
- Industry Applications:New energy motors, automotive motors, micro motors, etc.
- Work efficiency:800-1800PCS/H
- Operator:1 person
- Design Advantage:Adopt modular structure design, space-saving, simple debugging operation, automatic detection and assembly, IO communication control system, full-station detection and identification sensors, can be connected to the MES system, a wealth of expansion modules, convenient for subsequent upgrading and overhaul.

ProductOverview:
外rotor自动and magnet insertion:机,实现对大小直径转子磁 钢的自动装配,完成对转子的人工上料,磁钢弹夹上 料,自动校准,自动贴装,自动glue dispensing,自动压合,自 动固化等工艺,以提高转子的装配效率,降低人工的 劳动强度,提升产品的稳定性,应用于大功率转子的 磁钢贴合装配,同时具有通用性强,操作简单,易于 维护等特别,广泛应用于带磁磁钢的装配作业;
Motor automation equipment recommendation
Recommendation
Unfortunately, no information was found for you
Frequently Asked Questions
Common questions on selection, process and delivery. To learn more, contact us directly.
Q1. Which steps of outer-rotor magnet bonding does this machine handle?
From manual loading to unloading, magazine feeding, auto alignment, magnet placement, dispensing, pressing and curing all run on the same machine. Placement is set by the auto-alignment unit, and dispensing volume follows the adhesive and magnet size.
More motor equipment FAQsQ2. How are weak bonding and adhesive overflow controlled?
Alignment and pressing are the two decisive steps. Magnets are aligned before placement, then pressed and cured after dispensing, with bond-line thickness governed by the pressing stroke. Adhesive volume and curing parameters are calibrated on your adhesive during trial production and stored in the program.
More motor equipment FAQsQ3. Rotor diameters vary a lot in our range - can one machine cover them?
The machine is built around a diameter range and shares fixtures within a series; changeover means swapping fixtures and recalling parameters. Where the spread is very wide, two machines sized for the most-used diameters usually serve better than one oversized unit.
More motor equipment FAQsQ4. How are the magnets fed - one by one by hand?
No. Magnets are fed from a magazine and released piece by piece by the mechanism on cycle, while the operator only loads and unloads rotors. Magazines are made to the magnet size, so a different magnet means a different magazine plus the matching parameter set.
More motor equipment FAQsQ5. Is curing done on the machine or in a separate oven?
On the machine. After placement, dispensing and pressing, the rotor goes straight into curing without being moved to another unit. Curing parameters are calibrated on your adhesive during trial production and then stored in the program.
More motor equipment FAQsOnline Message
Online Message
Motor automation equipment recommendation
Recommendation
Unfortunately, no information was found for you
Online Message
Online Message




