Jiuju Science | The Fundamental Logic Behind Stator Winding Wire Diameter Design—Jiuju Motor’s Automated Assembly Line

不少人选型时会遇到这样的困惑:两款外观尺寸、额定力矩近乎一致的永磁同步电机,最大力矩和售价却差距明显。抛开磁钢、铁芯等因素,Stator Windings线径This is the key factor behind this difference, and the two types of motors also represent two completely different design philosophies.

I. Wire diameter determines the maximum torque; temperature rise is the key bottleneck

电机最大力矩由最大过载电流决定,而电流的上限由温升约束。行业内会根据散热条件,设定3-6A/mm²的标准电流密度,同款散热结构的电机,允许电流密度基本一致。

At the same current density, the larger the cross-sectional area of the conductor, the higher the maximum current it can carry. According to the motor torque formula T = Kt × I, when the torque coefficients Kt of the two motors are similar,Coarse-wire motorsOvercurrent, and the maximum torque will be much higher than that of a motor with a thin wire...and this is also the main reason for the difference in maximum torque between the two.

Precision Winding
Precision Winding

II. Similar Rated Torques, Achieved Through a Clever Balance of the Number of Windings

电机定子The space in a motor stator slot is limited, and the slot fill rate is relatively fixed. Thicker wire has a larger cross-sectional area, so fewer turns can be wound within the same slot space; thinner wire, on the other hand, allows for more turns to be wound. The increase in wire diameter and the corresponding decrease in the number of turns offset each other, ultimately resulting in the rated output torque and standard operating characteristics of the two motor models being essentially equivalent—which creates the illusion that their parameters are “seemingly identical.”

Jiuju Coreless Motor
Jiuju Coreless Motor

III. Price Differences Stem from Actual Material Costs

Copper is a core, high-cost raw material for electric motors. When the slot fill rates are similar, the total amount of copper used in coarse-wire motors far exceeds that in fine-wire motors; as a result, their raw material costs are higher, and their selling prices are naturally higher. In contrast, fine-wire motors use less copper, have lower costs, and offer better value for money.
Summary of Model Selection

Coarse-thread Motor DeviationHigh Performance, High Overload Capacity, suitable for applications with high startup loads and shock conditions; fine-wire motors are primarily designed forCost Control,适配负载平稳、无瞬时大扭矩需求的工况。选型切勿只看外观和额定参数,读懂内部Winding结构,才能选到适配的电机。

Jiuju Wound Finished Product
Jiuju Wound Finished Product
Previous. NEXT STORY.

Recommended