Why a 0.1 mm Magnet Insertion Deviation Is a Red Line for Drive Motor Assembly — Jiuju Explains
2790.1 mm 的磁钢插装偏差,久巨当电磁性能问题处理,不当装配精度问题。官网工艺资料口径:插磁偏差 0.1 mm 可致电机效率下降约 5%。
View Full Version0.1 mm 的磁钢插装偏差,久巨当电磁性能问题处理,不当装配精度问题。官网工艺资料口径:插磁偏差 0.1 mm 可致电机效率下降约 5%。
View Full Version久巨在驱动电机产线上默认把整体充磁排在定转子合装之后,而不是先充磁再装配。磁损与磁极错位都发生在装配段,充磁放到线尾才能在成品形态下一次成形。
View Full VersionA multi-pole architecture brings a high-frequency fundamental; at 10,000 rpm the fundamental frequency can reach several kHz. Traditional IGBTs suffer soaring switching losses and severe heating — it is the MHz-class switching capability of SiC MOSFETs that truly matches high-frequency multi-pole axial flux motors.
View Full VersionA multi-pole architecture brings a high-frequency fundamental; at 10,000 rpm the fundamental frequency can reach several kHz. Traditional IGBTs suffer soaring switching losses and severe heating — it is the MHz-class switching capability of SiC MOSFETs that truly matches high-frequency multi-pole axial flux motors.
View Full Version