先说留铁的好处。铁给磁通铺了一条低阻力的路,同样的磁钢,有铁芯的气隙磁密明显更高,磁钢用量能省一些。铁还有一个常被忘掉的身份:Hot Channel. The heat generated by the windings is transferred along the teeth to the iron core and then to the end faces, which allows for much more efficient heat transfer than relying solely on the resin.
So the choice isn’t simply ”the less iron, the more advanced.” If you want smooth operation, a thin design, and high RPM, you can use less iron; but if you need to withstand sustained high torque, are cost-sensitive, or have poor heat dissipation conditions, you often still need to keep the iron.
Jiuju Axial Flux Motor Automatic Assembly Line
From a manufacturing perspective, these three approaches place entirely different demands on the production line: the full-core method tests strip forming and winding capabilities; the segmented-core method tests module positioning accuracy and fixture repeatability; and the core-less method is more akin to electronics manufacturing, testing interlayer alignment. A common challenge Jiuju faces when developing disc motor assembly solutions is that whenever the stator layout changes, the workstations must be rearranged, making it difficult to reuse the same set of fixtures.
Jiuju Automation provides high-precision automatic assembly lines for axial flux motors, covering processes such as stator winding, magnet assembly, rotor balancing, and final product testing. These lines are suitable for applications in drones, new energy vehicles, and industrial drives. The company holds over 256 patents and is ISO 9001 certified...
The stator winding is exposed on a flat disc, giving a short heat path so oil or water cooling can be applied directly; however, large-diameter flat seals are more prone to leakage under hot-cold cycling, demanding higher sealing quality.
Jiuju Automation provides high-precision automatic assembly lines for axial flux motors, covering processes such as stator winding, magnet assembly, rotor balancing, and final product testing. These lines are suitable for applications in drones, new energy vehicles, and industrial drives. The company holds over 256 patents and is ISO 9001 certified...
A multi-pole architecture brings a high-frequency fundamental; at 10,000 rpm the fundamental frequency can reach several kHz. Traditional IGBTs suffer soaring switching losses and severe heating — it is the MHz-class switching capability of SiC MOSFETs that truly matches high-frequency multi-pole axial flux motors.