Axial-flux motors have achieved high-volume production, but three major core challenges remain unavoidable

Axial-Flux MotorThe performance advantages of axial flux motors have been repeatedly validated by extensive data: shorter axial dimensions, higher torque density, and lighter weight. However, to ensure these advantages are consistently realized on the production line, three key challenges must be overcome.

第一关是气隙精度。轴向电机的气隙通常只有零点几毫米,分布在整盘面上。任何微米级的平面度偏差、定转子相对倾斜或磁钢厚度不均,都会让气隙不均匀,产生单边磁拉力,进而带来振动、噪音和效率下降。传统圆柱电机的装配方式在这里基本不适用,必须改用平面贴合、力位控制和在线测量的组合方案。

Jiuju Dual-Stator Structure
Jiuju Dual-Stator Structure

The second challenge is thermal management.高功率密度意味着单位体积小发热量大,而三明治结构把定子绕组和rotor磁钢夹在中间,散热路径长、散热面积小。如果热量导不出去,绕组绝缘会加速老化,永磁体也可能发生不可逆退磁。这要求从材料选型、灌封工艺到整机结构都要为散热预留空间。

Jiuju Axial Flux Motor Finished Product
Jiuju Axial Flux Motor Finished Product

The third challenge is cost and consistency.Axial-flux motors rely on high-performance permanent magnets, specially shaped cores, high-precision bearings, and custom insulation components; however, the maturity of their upstream supply chain lags behind that of radial motors. At the same time, many key manufacturing processes still rely on manual labor, resulting in significant batch-to-batch variations, which directly drive up manufacturing costs and defect rates.

Jiuju Axial Flux Motor Exploded View
Jiuju Axial Flux Motor Exploded View

Through automated magnet assembly, precision assembly, CCD vision inspection, and in-line power measurement, Jiuju records key dimensional and performance data to establish a traceable, closed-loop manufacturing process. This approach is not intended to replace manual labor, but rather to ensure that deviations during mass production are controllable and that issues can be traced.

Frequently Asked Questions About Motor Automation
Motor Automation Case Study Videos
Motor Industry News

Unfortunately, no information was found for you

Unfortunately, no information was found for you

Unfortunately, no information was found for you

Previous. NEXT STORY.

Recommended