Determining Performance Limits: An Innovative Analysis of the Spatial Layout, Topology, and Stator Design of Axial-Flux Motors

Axial-Flux Motor的性能高度依赖空间拓扑布局,从基础的单盘、双盘结构到进阶的多盘叠堆、无轭分段定子设计,每一种布局都对应着明确的性能侧重与工程取舍,不存在绝对的 “最优结构”,只有最适配场景的方案。

Axial Flux Motor Images
Axial Flux Motor Images

四大基础拓扑构成行业主流格局。SSSR 单定子单rotor结构最为简单,轴向尺寸极致紧凑,量产成本低,但单侧磁路会产生严重的不平衡轴向磁拉力,高速工况下易引发振动与轴承磨损,适配低功率、低转速场景。DSSR 双定子单转子采用 “三明治” 对称结构,轴向受力完全平衡,双侧定子散热条件优异,是工业连续运转设备的可靠选择,但耗材与装配精度要求同步提升。DRSS 双转子单定子是高功率密度标杆,单定子双面做功,扭矩密度比 DSSR 高 15% 至 25%,适配新能源汽车主驱、航空航天等高要求场景,但绕组布线与动平衡调试难度大。多盘叠堆结构通过模块化堆叠实现功率倍数级扩展,可覆盖兆瓦级超大功率场景,但结构复杂度与成本同步攀升。

Spatial Layout of Axial Flux Motors
Spatial Layout of Axial Flux Motors

定子结构创新是性能突破的核心方向。无轭定子取消背部铁轭,减少 40% 至 60% 铁芯用量,整机减重 25% 至 30%,高频铁损降低 35% 以上,但结构刚性下降,对装配精度要求达到微米级。分段定子将整体定子拆解为独立齿模块,集中式绕组使铜损降低 10% 至 18%,散热效率提升 3 倍,同时解决了轴向电机Winding难题,制造周期缩短 50%,但拼接精度管控成为新挑战。

Axial Flux Motors
Axial Flux Motors

From a manufacturing perspective, structural complexity and mass production yield have an inverse relationship. SSSR yields can reach 98% or higher, while DSSR yields range from approximately 92% to 95%. In contrast, yoke-less segmented structures and multi-disc stack configurations experience a significant drop in mass production yield due to the high precision required for alignment. To address the assembly challenges posed by the diverse topologies of axial flux motors, Jiuju offers automated assembly solutions tailored to different structures, covering core processes such as precise magnet placement, stator-rotor force-position co-assembly, and online air gap inspection. By utilizing vision-based positioning and servo force control technology, we ensure micron-level assembly precision and stable mass production consistency, providing process and equipment support for the industrialization of various axial motor topologies.

Frequently Asked Questions About Motor Automation
Motor Automation Case Study Videos
Motor Industry News

Unfortunately, no information was found for you

Unfortunately, no information was found for you

Unfortunately, no information was found for you

Previous. NEXT STORY.

Recommended