The Era of Axial-Flux Motors 2.0: The Global Mass Production Rivalry Between Disk-Hub and YASA

2026 年Axial-Flux Motor赛道热度持续攀升,奔驰柏林工厂产线正式投产,国内盘毂动力年产能突破 30 万台,大批传统径向电机企业也加速布局盘式电机项目。但行业普遍存在认知偏差:样品研发成功并不等同于量产能力落地,二者之间的制造工程鸿沟,远大于电磁仿真报告呈现的技术差异。

轴向磁通The key bottleneck in the mass production of axial-flux motors lies not in electromagnetic principles, but in manufacturing processes. The silicon steel lamination process used in radial motors for over a century is mature and stable, with yield rates easily exceeding 99.1%; however, the stator of an axial flux motor features a flat disc structure, and the magnetic field propagates axially. Traditional silicon steel laminations cannot meet the three-dimensional magnetic conductivity requirements, so SMC soft magnetic composite materials must be used for molding. The final assembly stage presents an even greater challenge: when assembling the stator and rotor, technicians must counteract an axial magnetic force of nearly 9 kilonewtons while positioning the air gap within a tolerance of 0.1 millimeters; even a slight deviation can result in stator damage or a drastic drop in motor efficiency.

The Era of Axial-Flux Motors 2.0: The Global Mass Production Rivalry Between PanHub and YASA (images 1)
Jiuju Axial Flux Motor Automatic Assembly Line

The industry has currently diverged into two typical engineering approaches: Mercedes-Benz’s subsidiary YASA employs a yoke-less segmented stator design, in which the stator is broken down into independent tooth segments for separate manufacturing, inspection, and assembly. By decoupling the manufacturing process, it reduces the defect rate per unit and operates a mass production system comprising 98 manufacturing steps, targeting the high-performance passenger car market; Domestic manufacturer Panhu Power, on the other hand, retains the traditional yoke structure, refining and optimizing it within the existing process framework. By leveraging customized, specialized magnets and fully automated production lines, it achieves a yield rate of 98% or higher, making it better suited for high-reliability applications such as commercial vehicles and electric vessels.

The Era of Axial-Flux Motors 2.0: The Global Mass Production Rivalry Between PanHub and YASA (images 2)
Jiuju Axial Flux Motor Assembly Drawing

SMC materials are the core foundation that determines the upper limit of industry development. Their three-dimensional isotropic magnetic permeability is a necessary prerequisite for the mass production of axial flux motors; however, their magnetic permeability and iron loss performance still lag significantly behind those of silicon steel sheets. The pace of breakthroughs in material performance directly determines the ceiling for motor efficiency. Currently, the domestic supply chain has gradually established a competitive edge in SMC production capacity and the R&D of customized magnetic materials.

The Era of Axial-Flux Motors 2.0: The Global Mass Production Rivalry Between Pan Hub and YASA (images 3)
Jiuju Axial Flux Motor Automatic Assembly Line

On the application side, the lower-limb joints of humanoid robots have become a key focus for commercialization, and the high torque and slim profile of disc motors perfectly match the requirements of these joints; meanwhile, disc motors have already been implemented on a large scale in commercial vehicles and electric vessels. Jiuju possesses mature technical expertise in the overall magnetization and precision assembly processes for axial flux motors, supporting core procedures such as the saturation magnetization of permanent magnets and force-controlled assembly of stators and rotors, thereby helping the industry improve mass production consistency. Overall, the global axial flux motor market is dominated by China and Germany, with domestic companies already holding a first-mover advantage in terms of mass production scale. Looking ahead, breakthroughs in SMC material performance, the widespread adoption of fully automated production lines, and the finalization of development strategies by leading automakers will be key areas to watch for the industry’s future development.

[Disclaimer] Content provided by RIO Electric Drive,Copyright belongs to the original source. This content is provided for reference only. If you believe there has been an infringement, please contact the editor to have it removed. For partnership opportunities or any questions, please leave a message via the contact form.

Frequently Asked Questions About Motor Automation
Motor Automation Case Study Videos
Motor Industry News

Unfortunately, no information was found for you

Unfortunately, no information was found for you

Unfortunately, no information was found for you

Previous.

Recommended