Powering the Next Generation of Humanoid Robots: Purpose-Built Motor Design Is the Real Edge | JIUJU Motor Automatic Assembly Lines

当前国产新能源汽车电机技术日渐成熟,整机综合性能跻身全球第一梯队。业内不少人提出设想:能否直接将成熟的车用电机方案平移至人形机器人,借此压缩高额研发成本,进一步加快人形机器人商业化落地节奏。但行业实际研发测试印证,车用电机与人形机器人电机无法通用,二者工况需求悬殊,机器人电机必须开展专属定制化设计。

Embodied Robot Motor
Embodied Robot Motor

Operating conditions vary greatly: Generic motors cannot adapt to the complex joints of the entire body.

人形机器人关节数量多,膝盖、脚踝、手指、腰椎等不同关节,受力模式与运动工况截然不同,单一款通用电机无法适配全身多样化运行场景。以特斯拉Optimus为例,机器人拥有20余个关节,分别搭载空心杯电机与Frameless Torque Motor,两类电机分工明确,无法互换使用。腰胯关节需具备强承重性能,支撑机器人整体自重;脚踝、膝盖等下肢关节,既要保障行走步态平稳,还要拥有出色的抗冲击能力,抵御摔倒、磕碰带来的外力冲击;手指、手腕等微型关节,对控制精度要求极高,以此完成精细抓取、柔性交互等动作。人形机器人电机存在难以兼顾的参数矛盾:既要大扭矩、高负载,又要高动态响应,同时还要做到小型轻量化。反观车用电机,运行工况单一固定,只需提升功率与扭矩就能满足行车需求,两者核心设计逻辑完全相悖。

Frameless Torque Motor
Frameless Torque Motor

The key to humanoid robots lies in their overall adaptability

When evaluating the quality of robot motors, one cannot rely solely on hardware specifications; high-performance motors that are not compatible with the overall system have no practical value. Excessively high rotational speeds in lower-limb motors can disrupt walking gait, while excessive torque in hand motors can not only damage objects being manipulated but also pose safety risks to users. Therefore, motor R&D must be developed in an integrated and coordinated manner with the robot’s body structure, electronic control system, and safety protection modules. At present, the three mainstream drive solutions in the industry all have inherent flaws: high-reduction-ratio flexible drives provide ample power but lack control precision and are prone to vibration during operation; elastic transmission, which incorporates elastic elements, offers greater shock resistance but sacrifices dynamic response speed; and low-reduction-ratio direct-drive transmission provides excellent control precision but significantly increases the overall production cost of the robot.

Motor Exploded View
Motor Exploded View

由此可见,单纯优化传动结构只能缓解表面问题,无法解决核心痛点。只有按照关节功能差异化定制电机:手指搭载微型空心杯电机、肩髋关节配备内rotor电机、下肢重载部位选用外转子电机,因地制宜针对性研发,才是人形机器人电机研发的最优路径。

[Disclaimer] The content is sourced from the Motor Alliance. Copyright belongs to the original source. It is provided for reference only. If you believe your rights have been infringed, please contact the editor to have the content removed. For partnership opportunities or any questions, please leave a message via the backend.

Previous. NEXT STORY.

Recommended