Automatic dispensing and insertion of magnets for products. The process is as follows: manual loading→automatic dispensing→automatic feeding→magnetic steel insertion by mechanical module→automatic return→manual discharging. In the design of the design of safety devices, personnel body in the equipment, equipment in the state of shutdown, to protect the safety of personnel. The anti-dulling mechanism at the loading station avoids the increase of NG rate caused by loading materials. Before the magnet is inserted, the magnet in position pressurizing mechanism is designed to further ensure that the magnet is installed in place.

Program Description:

Automatic dispensing and sticking magnet steel pressure steel sleeve machine program introduction: 1, AB glue ratio 1:1, glue viscosity 10000mPa.s, with double liquid thimble type dispensing gun for dispensing, according to the need for up and down direction for dispensing. 2, manual loading rotor, put the rotor into the dispensing station dispensing, rotating up and down dispensing. 3、After the dispensing is finished, manually carry it to the steel sleeve press station, and then the product will be automatically moved to the magnetic steel paste station to paste the magnets in the opposite direction, after pasting one opposite magnet, rotate it to paste the other opposite magnet at a certain angle, there are multi-layer segments of slanting grades through the program to control a certain angle of rotation to achieve, and there is a repulsive situation can be set through the program to set up a reasonable gap and height, and then through the pressure of the steel sleeve to align the position. 4, after the product is pasted with the magnet, the product is automatically moved to the steel sleeve press station for pressing the steel sleeve, the steel sleeve needs to be manually loaded onto the fixture one by one, after pressing a steel sleeve, manually load the next steel sleeve onto the fixture, if the product needs to be loaded with two layers of steel sleeve, it is necessary to manually turn over the product and then press a steel sleeve, the two ends of the steel sleeve are aligned after the pressing is completed. 5, after pressing the steel sleeve, then manually unloading the product.