Jiuju Automation
轴向磁通电机想上新能源重卡，为什么卡在合装这几丝上？
432轴向磁通电机体积小、功率密度高，但定转子合装受强磁吸力制约，气隙均匀度与磁钢定位决定批量一致性。量产拼的不是设计，是装配过程能否被固定住。
View Full Version
轴向磁通电机体积小、功率密度高，但定转子合装受强磁吸力制约，气隙均匀度与磁钢定位决定批量一致性。量产拼的不是设计，是装配过程能否被固定住。
View Full Version
轴向磁通电机磁力线平行于转轴，定子被双层转子夹住，同功率下体积与重量约减半。它的量产难点集中在磁钢耐温与定转子合装，制造一致性直接决定良率与节拍。
View Full Version
A fully developed automated motor assembly line can replace a large number of workers, with production capacity and consistency far exceeding those of traditional methods. This video explains the challenges of manual assembly and the key advantages of automated production lines.
View Full Version
A multi-pole architecture brings a high-frequency fundamental; at 10,000 rpm the fundamental frequency can reach several kHz. Traditional IGBTs suffer soaring switching losses and severe heating — it is the MHz-class switching capability of SiC MOSFETs that truly matches high-frequency multi-pole axial flux motors.
View Full Version
无刷直流电机以电子换向替代机械碳刷，凭借高效率、低噪音、长寿命、可控性强等优势，广泛应用于航模、工业装备、汽车电子等领域。
View Full Version
动电机是电动汽车的 “心脏”，负责将动力电池的电能转化为机械能驱动车轮，相较燃油发动机具备效率高、功率密度大、噪音低、零排放等优势。
View Full Version
轴向磁场电机也常被称为轴向磁通电机，是当前电驱领域关注度较高的技术方向，在汽车驱动、低空经济、工业机器人关节等场景均有应用探索。
View Full Version
A multi-pole architecture brings a high-frequency fundamental; at 10,000 rpm the fundamental frequency can reach several kHz. Traditional IGBTs suffer soaring switching losses and severe heating — it is the MHz-class switching capability of SiC MOSFETs that truly matches high-frequency multi-pole axial flux motors.
View Full Version
Axial-flow fan motors feature a disc-type structure and require extremely high assembly precision. This video provides a step-by-step breakdown of the entire process, from stator varnishing and magnet mounting to stator-rotor assembly, adhesive application and curing, and finally testing and encapsulation.
View Full Version
Although the micro motors in handheld fans are small, the assembly process involves a series of closely interlinked steps. The video showcases a fully automated production line covering stator feeding, dispensing, UV curing, electrical testing, and final assembly.
View Full Version
Chinese Chinese
English
Spanish
French
German
Arabic
Russian
Hindi
Korean
Thai
Vietnamese